Skip to main content
Observer Ethical awards Winners 2011

YouGen Blog

How much loft insulation is enough?

Posted by Tim Pullen on 19 April 2010 at 10:22 am

Everyone understands the need to insulate the loft but few people know how much is enough. The loft is second only to the walls in terms of the proportion of the heat lost at 25%, but it is by far the easiest to deal with.

I often get told that the house is “super-insulated” as the loft has 250mm of insulation (“that’s nearly 10 inches, you know”). Well, Building Regulations call for a maximum U-value in the roof of 0.16W/m2 and that generally needs 270mm of mineral wool insulation - and that is nearly 11 inches. By today’s standards even that is not enough. A house built to Passivhaus principles will have 450mm mineral wool insulation in the loft, giving a U-value of less 0.08 W/m2. In a retrofit aiming at something between 300mm and 450mm would be a good target.


The choice of insulating material will be dictated by a few factors; space, access and probably price.

Dealing first with space, rigid foam insulation (the PUR or PIR Kingspan or Celotex types) are about twice as good insulators as wool types (sheep wool, Rockwool, etc.) and so take half the space. Where we have discussed 300mm as a good target, getting the same level of insulation from PUR or PIR will take only 150mm.

Access is often a big issue, which is an argument in favour of sustainable insulation – sheep wool, hemp, cellulose – as these are much more pleasant to handle. In tight, confined, airless lofts moving rolls of mineral wool while wearing gloves, goggles and a mask can be irritating – literally and metaphorically. Natural insulation needs no such protective measures and is much more fun to play with.

But price may be a factor. Natural insulation is still more expensive and although it has many advantages it is still only as good an insulator as mineral wool.

Multifoil insulation can be an answer, but only a partial answer. The LABC (Local Authority Building Control) suggest that multifoils should only be used in conjunction with another form of insulation (basically because they are not as good as the manufacturers say they are). But they are good draught excluders and easy to fit.


Generally insulation is laid horizontally on the ceiling joists and there are good technical reasons for this. Lofts are usually ventilated spaces – the ventilation is necessary to keep the roof timbers in good order. Insulating at the rafters rather than the ceiling joist could mean that the ventilation will increase the heat lost from the house and put the roof timbers in danger of rot.

Insulating at the rafters level can be done but it needs to be done carefully and in full knowledge of all that is going on in the loft.

And finally…

Don’t forget the CERT (Carbon Emissions Reduction Target) Scheme. The scheme provides grant funding to all householders to improve energy efficiency measures. Just phone your energy supplier and ask for a survey under the CERT scheme.

Photo by ejhogbin

About the author: Tim Pullen is eco-editor for Homebuilding & Renovating magazine, author of Simply Sustainable Homes and founder of sustainable property consultancy WeatherWorks.

If you have a question about anything in the above blog, please ask it in the comments section below.

Like this blog? Keep up to date with our free monthly newsletter


2 comments - read them below or add one


frankmetComment left on: 11 October 2014 at 12:33 pm

You can always add insulation by using loft legs like shown in this video:

report abuse

EnergyLink Ltd

EnergyLink LtdComment left on: 12 July 2010 at 2:36 pm

It really took me by surprise at the amount of insulation talked of in this article.

report abuse

Leave a comment

You must log in to make a comment. If you haven't already registered, please sign up as a company or an individual, then come back and have your say.